Horizontal Lifelines

We supply and install rated fall arrest safety systems which provides safety for all residential, commercial and industrial building sites, from a series of roof anchor points to a complete network of engineered systems for maintenance, cleaning, access and inspections when working at heights.
We do not work exclusively with one manufacturer so we are free to recommend the best solution for each situation , often this means using more than one manufacturers product.

- SafetyLink FrogLine
- SafetyLink Advance Lifeline

SafetyLink FrogLine

Permanent horizontal lifeline system, to be mounted on the surface of a metal roof profile.
Each anchor is equipped with an engineered energy absorbing region to minimise loads on users and structures in
the event of a fall.
Suits pitches no greater than 25 degrees on a multitude of roof profiles.

The FrogLine has been rigorously tested and manufactured in accordance with Australia and New Zealand
Standard AS/NZS 1891.2 and European EN795:2012, CEN/TS 16415:2013.

SafetyLink FrogLine - RetroLink version

The FrogLine is also available as a RetroLink Mount specifically for use with permanent horizontal height safety lifeline systems. Constructed entirely of 316 stainless steel with foam barrier tape. Designed to be mounted through various metal profile roof sheeting into steel purlin construction.
This alternative would suit situations where the roof sheet is not suitable for a surface mount system.
Suits roof pitches up to 25 degrees.

FrogLine Shuttle

The FrogLine Shuttle incorporates flawless functionality with a durable solid stainless steel construction.
The frog shaped design was derived from a need to weight the shuttle to achieve perfect alignment with the FrogLine’s intermediate and corner anchors. The unique look also makes the FrogLine shuttle easily identifiable as belonging to the SafetyLink FrogLine permanent horizontal lifeline system.

Intended for use with the FrogLine System.
Included: Karabiner: Tri-Lock, alloy steel zinc plated.

SafetyLink Advance Lifeline

SafetyLink Advance Lifeline

Permanent horizontal height safety lifeline system, to be mounted on the surface of a metal roof profile or on plywood plinths for membrane roofs. Each anchor is equipped with an engineered energy absorbing region to minimise loads on users and structures in the event of a fall. Suits pitches no greater than 25 degrees on a
multitude of roof profiles and would suit situations requiring greater cable clearance from the iron.

Intended for use with 8mm stainless steel cables.
The Advance system has been rigorously tested and manufactured in accordance with Australia and New Zealand
Standard AS/NZS 1891.2.

SafetyLink Advance - RetroLink version

The Advance system is also available as a RetroLink Mount specifically for use with permanent horizontal lifeline systems. Designed to be mounted through various metal profile roof sheeting through to a steel purlins. The RetroLink would suit situations where the roof sheet is not suitable for a surface mount system and where a situation requires greater cable clearance from the iron.
Constructed entirely of 316 stainless steel with foam barrier tape.
Suits roof pitches up to 25 degrees or as a wall mount into steel purlin girts.

Advance Lifeline Shuttle

The Advance Shuttle incorporates flawless functionality with a durable solid stainless steel construction.

Specifically, for use with SafetyLink Advance permanent horizontal lifeline systems.
No need to disconnect from lifeline as it passes easily over Intermediate TBolts.
Intended for use with the Advance System.
Included: Karabiner: Tri-Lock, alloy steel zinc plated.